Embedded software and hardware implementation system for a human machine interface based on ISOAgLib

Enkhbaatar TUMENJARGAL; Luubaatar BADARCH; Hyeokjae KWON; Woonchul HAM

doi:10.1631/jzus.C1200270

Your Location：

Home >

Browse articles >

Embedded software and hardware implementation system for a human machine interface based on ISOAgLib

Computer & Automation | Updated：2022-12-09

- Embedded software and hardware implementation system for a human machine interface based on ISOAgLib
- Embedded software and hardware implementation system for a human machine interface based on ISOAgLib
- Frontiers of Information Technology & Electronic Engineering Vol. 14, Issue 3, Pages: 155-166(2013)
- Affiliations：
  
  1.Division of Electronic Engineering, Chonbuk National University, Jeonbuk-do 561-756, Korea
  2.School of Information and Communication Technology, Mongolian University of Science and Technology, Ulaanbaatar, Mongolia
- Author bio：
  
  [ "Enkhbaatar TUMENJARGAL, E-mail: enkhbaatar79@gmail.com" ]
- Funds：
- DOI：10.1631/jzus.C1200270
  CLC： TP39
- Received：19 September 2012，
  
  Revised：2013-;2-25，
  
  Published：2013-03
- Accepted：
Scan QR Code
Enkhbaatar TUMENJARGAL, Luubaatar BADARCH, Hyeokjae KWON, et al. Embedded software and hardware implementation system for a human machine interface based on ISOAgLib[J]. Frontiers of Information Technology & Electronic Engineering, 2013, 14(3): 155-166.
DOI：

Enkhbaatar TUMENJARGAL, Luubaatar BADARCH, Hyeokjae KWON, et al. Embedded software and hardware implementation system for a human machine interface based on ISOAgLib[J]. Frontiers of Information Technology & Electronic Engineering, 2013, 14(3): 155-166. DOI： 10.1631/jzus.C1200270.

摘要

Abstract

Modern agricultural machinery demands adoption of embedded electronic and remote sensing technology for precision agriculture. One of the electronic devices commonly used is the virtual terminal (VT) for tractors. A VTos functions and terminology are described in the ISO 11783 standard. This paper presents a control system design and implementation for a VT and some other electronic control units (ECUs) for agricultural vehicles based on that standard. Hardware and software development for the VT is implemented using the ISOAgLib open library

in the advanced embedded system. The main part of the system is an embedded board based on a Samsung S3C6410 ARM11 core microprocessor with a controller area network (CAN) module. Its working environment is Windows Embedded CE 6.0 (WinCE6.0). The ISOAgLib library provides abundant open sources consistent implementation of ISO 11783. It is written in C++ programming language using object-oriented technology. In this paper

we describe an ISO 11783-based tractor control system with a CAN and its implementation in the embedded system. This paper also explains the operation of a CAN-bus device driver in WinCE6.0 and some modifications of ISOAgLib for our target system. The target system consists of the VT

an ECU for the global positioning system (GPS)

and an ECU for lighting for an agricultural tractor. The ECU for GPS and the ECU of a light controller are implemented using STM32F107F ARM Cortex M3-based development boards.

关键词

Keywords

references

AGCO Co . . FieldStar, the Science of Agriculture. Virtual Terminal Useros Guide, Publication No. 79015206, . . Duluth, USA. , , 2002 . . .

AGROCOM GmbH & Co. Agrarsystem KG . . CEBIS MOBILE VA User Manual . . Bielefeld, Germany. , , 2009 . . .

R. Bosch . . CAN Specification Version 2.0. Postfach . . Germany. , , 1991 . . .

G. Craessaerts , , , K. Maertens , , , J. de Baerdemaeker . . A Windows-based design environment for combine automation via CANbus . . Comput. Electron. Agric. , , 2005 . . 49 ( ( 2 ): ): 233 - - 245 . . DOI: 10.1016/j.compag.2005.04.007 http://doi.org/10.1016/j.compag.2005.04.007 . .

Deere & Co . . GreenStar 3 Display 2630 Operatoros Manual. Publication No. OMPFP12408 . . California, USA. , , 2012 . . .

DICKEY-John Co . . Auto Section Control System: Operatoros Manual. Publication No. 11001-1561B-201207 . . Auburn, USA. , , 2012 . . .

11783-1 ISO . . Tractors and Machinery for Agriculture and Forestry-Serial Control and Communications Data Network-Part 1: General Standard for Mobile Data Communication . . International Organization for Standardization, Geneva. , , 2007 . . .

ISO 11783-3 . . Tractors and Machinery for Agriculture and Forestry-Serial Control and Communications Data Network-Part 3: Serial Control and Communications Data Network . . International Organization for Standardization, Geneva. , , 2007 . . .

ISO 11783-4 . . Tractors and Machinery for Agriculture and Forestry-Serial Control and Communications Data Network-Part 4: Network Layer . . International Organization for Standardization, Geneva. , , 2001 . . .

ISO 11783-5 . . Tractors and Machinery for Agriculture and Forestry-Serial Control and Communications Data Network-Part 5: Network Management . . International Organization for Standardization, Geneva. , , 2001 . . .

ISO11783-6 . . Tractors and Machinery for Agriculture and Forestry-Serial Control and Communications Data Network-Part 6: Virtual Terminal . . International Organization for Standardization, Geneva. , , 2004 . . .

ISO 11783-10 . . Tractors and Machinery for Agriculture and Forestry-Serial Control and Communications Data Network-Part 10: Task Controller and Manegement Information System Data Interchange . . International Organization for Standardization, Geneva. , , 2009 . . .

ISO 11783-13 . . Tractors and Machinery for Agriculture and Forestry-Serial Control and Communications Data Network-Part 13: File Server . . International Organization for Standardization, Geneva. , , 2007 . . .

S. Kim , , , S. Park , , , C. Kim , , , M. Kim . . Implementation of the Communication Model for ISO 11783 Standards Based on AUTOSAR . . ASABE Annual Int. Meeting , , 2011 . . p.1 - - 12 . . . .

Mller Elektronik GmbH & Co . . ISOBUS-Terminals Flexible and Future-Proof Through APP & GO . . Salzkotten, Germany. , , 2012 . . .

M. Ohman , , , J. Kalmari , , , A. Visala . . XML Based Graphical User Interface Editor and Runtime Parser for ISO 11783 Machine Automation Systems . . Proc. 17th IFAC World Congress , , 2008 . . p.1578 - - 1583 . . DOI: 10.3182/20080706-5-KR-1001.00269 http://doi.org/10.3182/20080706-5-KR-1001.00269 . .

T. Oksanen , , , A. Kunnas , , , A. Visala . . Development and Runtime Environment for Embedded Controller Supporting ISO 11783 Standard . . Proc. 18th IFAC World Congress , , 2011 . . p.2912 - - 2918 . . DOI: 10.3182/20110828-6-IT-1002.02203 http://doi.org/10.3182/20110828-6-IT-1002.02203 . .

R. Pereira , , , E. Godoy , , , R. Sakai , , , F. Cavani , , , R. Sousa , , , A. Porto , , , R. Inamasu . . ISO 11783 Standard: Procedures for Serial Data Communication Between the Implement ECU with the Task Controller . . CIGR Proc. of Technology and Management to Increase the Efficiency in Sustainable Agricultural Systems , , 2009 . . p.1 - - 19 . . . .

A. Spangler , , , M. Wodok . . Development of ISO 11783 Applications in an Object Oriented Way Using the Open Source Library ISOAgLib . . Available from , , 2010 . . http://www.isoaglib.com http://www.isoaglib.com , , [Accessed on Sept. 30, 2010] . .

H. Speckmann , , , G. Jahns . . Development and application of an agricultural BUS for data transfer . . Comput. Electron. Agric. , , 1999 . . 23 ( ( 3 ): ): 219 - - 237 . . DOI: 10.1016/S0168-1699(99)00042-3 http://doi.org/10.1016/S0168-1699(99)00042-3 . .

M.L. Stone , , , K.D. McKee , , , C.W. Formwalt , , , R.K. Benneweis . . ISO 11783: an Electronic Communications Protocol for Agricultural Equipment . . Agricultural Equipment Technology Conf. , , 1999 . . p.1 - - 17 . . . .

Views

Downloads

CSCD

Alert me when the article has been cited

Submit

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

Chat

Address：Zhejiang University Press, 148 Tianmushan Road, Hangzhou, China Postal code：310028
Tel：+86-571-88273162 Email：fitee@zju.edu.cn
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰