考虑转运车辆的柔性车间调度问题综述

辛斌; 鲁赛; 王晴; 邓方

doi:10.1631/FITEE.2300795

Your Location：

Home >

Browse articles >

考虑转运车辆的柔性车间调度问题综述

常规文章 | Updated：2025-04-03

- 考虑转运车辆的柔性车间调度问题综述
  Enhanced Publication
- A review of flexible job shop scheduling problems considering transportation vehicles
- 信息与电子工程前沿（英文） 2025年26卷第3期页码：332-353
- Affiliations：
  
  1.School of Automation, Beijing Institute of Technology, Beijing 100081, China
  2.Beijing Institute of Technology Chongqing Innovation Center, Chongqing 401120, China
- Author bio：
  
  ‡Corresponding author
  bit_lusai@163.com
  wangqing1020@bit.edu.cn
  dengfang@bit.edu.cn
- Funds：
  
  National Key R&D Program of China(2018YFB1308000);National Outstanding Youth Talents Support Program(61822304);Shanghai Municipal Science and Technology Major Project(2021SHZDZX0100);Shanghai Municipal Commission of Science and Technology Project(19511132101);Projects of Major International (Regional) Joint Research Program of the National Natural Science Foundation of China(61720106011);Beijing Advanced Innovation Center for Intelligent Robots and Systems, the National Science Fund for Distinguished Young Scholars of China(62025301);National Natural Science Foundation of China(61873033)
- DOI：10.1631/FITEE.2300795
  中图分类号： TP273
- 收稿日期：2023-11-22，
  
  修回日期：2024-02-20，
  
  纸质出版日期：2025-03
- Accepted：
Scan QR Code
辛斌, 鲁赛, 王晴, 等. 考虑转运车辆的柔性车间调度问题综述[J]. 信息与电子工程前沿（英文）, 2025,26(3):332-353.

Bin XIN, Sai LU, Qing WANG, et al. A review of flexible job shop scheduling problems considering transportation vehicles[J]. Frontiers of information technology & electronic engineering, 2025, 26(3): 332-353.
辛斌, 鲁赛, 王晴, 等. 考虑转运车辆的柔性车间调度问题综述[J]. 信息与电子工程前沿（英文）, 2025,26(3):332-353. DOI： 10.1631/FITEE.2300795.

Bin XIN, Sai LU, Qing WANG, et al. A review of flexible job shop scheduling problems considering transportation vehicles[J]. Frontiers of information technology & electronic engineering, 2025, 26(3): 332-353. DOI： 10.1631/FITEE.2300795.

摘要

柔性制造系统中加工机器与转运车辆的联合调度问题已引起学术界和工业界的广泛关注。与传统柔性车间调度问题相比，将转运车辆调度纳入柔性制造系统的调度，使得联合调度问题的求解更加具有挑战性和实践意义。本文对联合调度问题的常见假设、约束、目标函数和基准算例作了归纳总结。然后，从出版期刊、历年发表文章数量以及求解方法等角度，对截至2023年的相关文献进行了统计和讨论。随后，根据解决方法的类型，将其分为精确算法、启发式算法、元启发式算法和群体智能算法，并梳理已有文献。最后，总结了联合调度问题的研究趋势和未来挑战。

Abstract

The flexible job shop scheduling problem for processing machines and transportation vehicles (FJSP_PT) has garnered significant attention from academia and industry. Due to the inclusion of transportation vehicle scheduling in the scheduling problem of flexible manufacturing systems

solving FJSP_PT becomes more challenging and significantly more practically relevant compared to the flexible job shop scheduling problem. We summarize the assumptions

constraints

objective functions

and benchmarks of FJSP_PT. Then

statistical analysis is conducted on the literature up to 2023

including journals

number of articles published each year

and solution algorithms. We analyze recent literature on FJSP_PT

categorizing it based on algorithms into exact algorithms

heuristic algorithms

meta-heuristic algorithms

and swarm intelligence based algorithms. Finally

the research trends and challenges faced by FJSP_PT are summarized.

关键词

Keywords

references

Abdelmaguid TF , Nassef AO , 2010 . A constructive heuristic for the integrated scheduling of machines and multiple-load material handling equipment in job shops . Int J Adv Manuf Technol , 46 ( 9-12 ): 1239 - 1251 . https://doi.org/10.1007/s00170-009-2176-7 https://doi.org/10.1007/s00170-009-2176-7

Abdelmaguid TF , Nassef AO , Kamal BA , et al. , 2004 . A hybrid GA/heuristic approach to the simultaneous scheduling of machines and automated guided vehicles . Int J Prod Res , 42 ( 2 ): 267 - 281 . https://doi.org/10.1080/0020754032000123579 https://doi.org/10.1080/0020754032000123579

Aldaihani MM , 2015 . Scheduling methodologies for a flexible manufacturing cell with non-identical parallel machines and a robot . Int J Ind Syst Eng , 21 ( 4 ): 499 - 514 . https://doi.org/10.1504/IJISE.2015.072730 https://doi.org/10.1504/IJISE.2015.072730

Amirteimoori A , Kia R , 2023 . Concurrent scheduling of jobs and AGVs in a flexible job shop system: a parallel hybrid PSO-GA meta-heuristic . Flex Serv Manuf J , 35 ( 3 ): 727 - 753 . https://doi.org/10.1007/s10696-022-09453-y https://doi.org/10.1007/s10696-022-09453-y

Anandaraman C , Vikram A , Sankar M , et al. , 2012 . Evolutionary approaches for scheduling a flexible manufacturing system with automated guided vehicles and robots . Int J Ind Eng Comput , 3 ( 4 ): 627 - 648 . https://doi.org/10.5267/j.ijiec.2012.03.004 https://doi.org/10.5267/j.ijiec.2012.03.004

Babu KP , Babu VV , Medikondu NR , 2018 . Implementation of heuristic algorithms to synchronized planning of machines and AGVs in FMS . Manag Sci Lett , 8 ( 6 ): 543 - 554 . https://doi.org/10.5267/j.msl.2018.5.001 https://doi.org/10.5267/j.msl.2018.5.001

Badakhshian M , Sulaiman SB , Ariffin MKABM , 2012 . Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm . Int J Phys Sci , 7 ( 9 ): 1461 - 1471 . https://doi.org/10.5897/IJPS11.407 https://doi.org/10.5897/IJPS11.407

Balogun OO , Popplewell K , 1999 . Towards the integration of flexible manufacturing system scheduling . Int J Prod Res , 37 ( 15 ): 3399 - 3428 . https://doi.org/10.1080/002075499190112 https://doi.org/10.1080/002075499190112

Baruwa OT , Piera MA , 2016 . A coloured Petri net-based hybrid heuristic search approach to simultaneous scheduling of machines and automated guided vehicles . Int J Prod Res , 54 ( 16 ): 4773 - 4792 . https://doi.org/10.1080/00207543.2015.1087656 https://doi.org/10.1080/00207543.2015.1087656

Bilge Ü , Ulusoy G , 1995 . A time window approach to simultaneous scheduling of machines and material handling system in an FMS . Oper Res , 43 ( 6 ): 1058 - 1070 . https://doi.org/10.1287/opre.43.6.1058 https://doi.org/10.1287/opre.43.6.1058

Brandimarte P , 1993 . Routing and scheduling in a flexible job shop by tabu search . Annu Oper Res , 41 ( 3 ): 157 - 183 . https://doi.org/10.1007/BF02023073 https://doi.org/10.1007/BF02023073

Brucker P , Burke EK , Groenemeyer S , 2012 . A mixed integer programming model for the cyclic job-shop problem with transportation . Discr Appl Math , 160 ( 13-14 ): 1924 - 1935 . https://doi.org/10.1016/j.dam.2012.04.001 https://doi.org/10.1016/j.dam.2012.04.001

Chambers JB , Barnes JW , 1996 . New Tabu Search Results for the Job Shop Scheduling Problem . Technical Report Series ORP96-06 , The University of Texas , Austin, USA .

Chan FTS , Chan HK , 2004 . A comprehensive survey and future trend of simulation study on FMS scheduling . J Intell Manuf , 15 ( 1 ): 87 - 102 . https://doi.org/10.1023/B:JIMS.0000010077.27141.be https://doi.org/10.1023/B:JIMS.0000010077.27141.be

Chaudhry IA , Mahmood S , Shami M , 2011 . Simultaneous scheduling of machines and automated guided vehicles in flexible manufacturing systems using genetic algorithms . J Centr South Univ , 18 ( 5 ): 1473 - 1486 . https://doi.org/10.1007/s11771-011-0863-7 https://doi.org/10.1007/s11771-011-0863-7

Chaudhry IA , Rafique AF , Elbadawi IAQ , et al. , 2022 . Integrated scheduling of machines and automated guided vehicles (AGVs) in flexible job shop environment using genetic algorithms . Int J Ind Eng Comput , 13 ( 3 ): 343 - 362 . https://doi.org/10.5267/j.ijiec.2022.2.002 https://doi.org/10.5267/j.ijiec.2022.2.002

Chen J , Zhang SY , Gao Z , et al. , 2010 . Feature-based initial population generation for the optimization of job shop problems . J Zhejiang Univ-Sci C (Comput & Electron) , 11 ( 10 ): 767 - 777 . https://doi.org/10.1631/jzus.C0910707 https://doi.org/10.1631/jzus.C0910707

Chen K , Bi L , Wang WY , 2022 . Research on integrated scheduling of AGV and machine in flexible job shop . J Syst Simul , 34 ( 3 ): 4 . https://doi.org/10.16182/j.issn1004731x.joss.20-0796 https://doi.org/10.16182/j.issn1004731x.joss.20-0796

Chen L , Bostel N , Dejax P , et al. , 2007 . A tabu search algorithm for the integrated scheduling problem of container handling systems in a maritime terminal . Eur J Oper Res , 181 ( 1 ): 40 - 58 . https://doi.org/10.1016/j.ejor.2006.06.033 https://doi.org/10.1016/j.ejor.2006.06.033

Chetto H , Castagna P , Plot C , 1995 . Performance evaluation of dynamic scheduling strategies for manufacturing systems . IFAC Proc Vol , 28 ( 10 ): 347 - 352 . https://doi.org/10.1016/S1474-6670(17)51542-6 https://doi.org/10.1016/S1474-6670(17)51542-6

Chikhi N , Abbas M , Benmansour R , et al. , 2015 . A two-stage flow shop scheduling problem with transportation considerations . 4OR , 13 ( 4 ): 381 - 402 . https://doi.org/10.1007/s10288-015-0297-4 https://doi.org/10.1007/s10288-015-0297-4

Dai M , Tang DB , Adriana G , et al. , 2019 . Multi-objective optimization for energy-efficient flexible job shop scheduling problem with transportation constraints . Rob Comput Integr Manuf , 59 : 143 - 157 . https://doi.org/10.1016/j.rcim.2019.04.006 https://doi.org/10.1016/j.rcim.2019.04.006

Dang QV , Nguyen L , 2016 . A heuristic approach to schedule mobile robots in flexible manufacturing environments . Proc CIRP , 40 : 390 - 395 . https://doi.org/10.1016/j.procir.2016.01.073 https://doi.org/10.1016/j.procir.2016.01.073

Dang QV , Rudová H , Nguyen CT , 2019a . Adaptive large neighborhood search for scheduling of mobile robots . Proc Genetic and Evolutionary Computation Conf , p. 224 - 232 . https://doi.org/10.1145/3321707.3321764 https://doi.org/10.1145/3321707.3321764

Dang QV , Nguyen CT , Rudová H , 2019b . Scheduling of mobile robots for transportation and manufacturing tasks . J Heurist , 25 ( 2 ): 175 - 213 . https://doi.org/10.1007/s10732-018-9391-z https://doi.org/10.1007/s10732-018-9391-z

Deroussi L , 2014 . A hybrid PSO applied to the flexible job shop with transport . Proc 1 st Int Conf on Swarm Intelligence Based Optimization , p. 115 - 122 . https://doi.org/10.1007/978-3-319-12970-9_13 https://doi.org/10.1007/978-3-319-12970-9_13

Deroussi L , Gourgand M , Tchernev N , 2006 . Combining optimization methods and discrete event simulation: a case study in flexible manufacturing systems . Proc Int Conf on Service Systems and Service Management , p. 495 - 500 . https://doi.org/10.1109/ICSSSM.2006.320512 https://doi.org/10.1109/ICSSSM.2006.320512

Deroussi L , Gourgand M , Tchernev N , 2008 . A simple metaheuristic approach to the simultaneous scheduling of machines and automated guided vehicles . Int J Prod Res , 46 ( 8 ): 2143 - 2164 . https://doi.org/10.1080/00207540600818286 https://doi.org/10.1080/00207540600818286

Elmi A , Topaloglu S , 2013 . A scheduling problem in blocking hybrid flow shop robotic cells with multiple robots . Comput Oper Res , 40 ( 10 ): 2543 - 2555 . https://doi.org/10.1016/j.cor.2013.01.024 https://doi.org/10.1016/j.cor.2013.01.024

Erol R , Sahin C , Baykasoglu A , et al. , 2012 . A multi-agent based approach to dynamic scheduling of machines and automated guided vehicles in manufacturing systems . Appl Soft Comput , 12 ( 6 ): 1720 - 1732 . https://doi.org/10.1016/j.asoc.2012.02.001 https://doi.org/10.1016/j.asoc.2012.02.001

Fattahi P , Saidi Mehrabad M , Jolai F , 2007 . Mathematical modeling and heuristic approaches to flexible job shop scheduling problems . J Intell Manuf , 18 ( 3 ): 331 - 342 . https://doi.org/10.1007/s10845-007-0026-8 https://doi.org/10.1007/s10845-007-0026-8

Gao KZ , Cao ZG , Zhang L , et al. , 2019 . A review on swarm intelligence and evolutionary algorithms for solving flexible job shop scheduling problems . IEEE/CAA J Autom Sin , 6 ( 4 ): 904 - 916 . https://doi.org/10.1109/JAS.2019.1911540 https://doi.org/10.1109/JAS.2019.1911540

Gnanavel Babu A , Jerald J , Noorul Haq A , et al. , 2010 . Scheduling of machines and automated guided vehicles in FMS using differential evolution . Int J Prod Res , 48 ( 16 ): 4683 - 4699 . https://doi.org/10.1080/00207540903049407 https://doi.org/10.1080/00207540903049407

Godinho Filho M , Barco CF , Tavares Neto RF , 2014 . Using genetic algorithms to solve scheduling problems on flexible manufacturing systems (FMS): a literature survey, classification and analysis . Flex Serv Manuf J , 26 ( 3 ): 408 - 431 . https://doi.org/10.1007/s10696-012-9143-6 https://doi.org/10.1007/s10696-012-9143-6

Gu WB , Li YX , Zheng KH , et al. , 2020 . A bio-inspired scheduling approach for machines and automated guided vehicles in flexible manufacturing system using hormone secretion principle . Adv Mech Eng , 12 ( 2 ): 1 - 17 . https://doi.org/10.1177/1687814020907787 https://doi.org/10.1177/1687814020907787

Gu WN , Li YX , Li Z , et al. , 2019 . An intelligent approach for dynamic AGV scheduling problem in the discrete manufacturing system . Proc IEEE 3 rd Information Technology, Networking, Electronic and Automation Control Conf , p. 1736 - 1739 . https://doi.org/10.1109/ITNEC.2019.8729029 https://doi.org/10.1109/ITNEC.2019.8729029

Gupta YP , Gupta MC , Bector CR , 1989 . A review of scheduling rules in flexible manufacturing systems . Int J Comput Integr Manuf , 2 ( 6 ): 356 - 377 . https://doi.org/10.1080/09511928908944424 https://doi.org/10.1080/09511928908944424

Ham A , 2020 . Transfer-robot task scheduling in flexible job shop . J Intell Manuf , 31 ( 7 ): 1783 - 1793 . https://doi.org/10.1007/s10845-020-01537-6 https://doi.org/10.1007/s10845-020-01537-6

He LJ , Chiong R , Li WF , et al. , 2022 . A multiobjective evolutionary algorithm for achieving energy efficiency in production environments integrated with multiple automated guided vehicles . Knowl-Based Syst , 243 : 108315 . https://doi.org/10.1016/j.knosys.2022.108315 https://doi.org/10.1016/j.knosys.2022.108315

He YA , Xia MH , 2021 . Research on mass personalization production model based on the “Industry 4.0.” Manuf Autom , 43 ( 1 ): 25 - 29 (in Chinese) . https://doi.org/10.3969/j.issn.1009-0134.2021.01.007 https://doi.org/10.3969/j.issn.1009-0134.2021.01.007

He YM , Xin B , Lu S , et al. , 2022 . Memetic algorithm for dynamic joint flexible job shop scheduling with machines and transportation robots . J Adv Comput Intell Intell Inform , 26 ( 6 ): 974 - 982 . https://doi.org/10.20965/jaciii.2022.p0974 https://doi.org/10.20965/jaciii.2022.p0974

Heger J , Voss T , 2017 . Optimal scheduling for automated guided vehicles (AGV) in blocking job-shops . Proc IFIP Int Conf on Advances in Production Management Systems , p. 151 - 158 . https://doi.org/10.1007/978-3-319-66923-6_18 https://doi.org/10.1007/978-3-319-66923-6_18

Hemmati FM , Haleh H , Saghaei A , 2018 . A flexible cell scheduling problem with automated guided vehicles and robots under energy-conscious policy . Sci Iran , 25 ( 1 ): 339 - 358 . https://doi.org/10.24200/SCI.2017.4399 https://doi.org/10.24200/SCI.2017.4399

Homayouni SM , Fontes DBMM , 2021 . Production and transport scheduling in flexible job shop manufacturing systems . J Glob Optim , 79 ( 2 ): 463 - 502 . https://doi.org/10.1007/s10898-021-00992-6 https://doi.org/10.1007/s10898-021-00992-6

Homayouni SM , Fontes DBMM , Gonçalves JF , 2023 . A multistart biased random key genetic algorithm for the flexible job shop scheduling problem with transportation . Int Trans Oper Res , 30 ( 2 ): 688 - 716 . https://doi.org/10.1111/itor.12878 https://doi.org/10.1111/itor.12878

Hoshino S , Seki H , Naka Y , 2008 . Development of a flexible and agile multi-robot manufacturing system . IFAC Proc Vol , 41 ( 2 ): 15786 - 15791 . https://doi.org/10.3182/20080706-5-KR-1001.02669 https://doi.org/10.3182/20080706-5-KR-1001.02669

Jerald J , Asokan P , Saravanan R , et al. , 2006 . Simultaneous scheduling of parts and automated guided vehicles in an FMS environment using adaptive genetic algorithm . Int J Adv Manuf Technol , 29 ( 5 ): 584 - 589 . https://doi.org/10.1007/s00170-005-2529-9 https://doi.org/10.1007/s00170-005-2529-9

Kumar MVS , Janardhana R , Rao CSP , 2011 . Simultaneous scheduling of machines and vehicles in an FMS environment with alternative routing . Int J Adv Manuf Technol , 53 ( 1-4 ): 339 - 351 . https://doi.org/10.1007/s00170-010-2820-2 https://doi.org/10.1007/s00170-010-2820-2

Kumar N , Chandna P , Joshi D , 2019 . Integrated scheduling of part, tool and automated guided vehicles in a flexible manufacturing system using modified genetic algorithm . Int J Ind Syst Eng , 32 ( 4 ): 443 - 468 . https://doi.org/10.1504/IJISE.2019.101332 https://doi.org/10.1504/IJISE.2019.101332

Lacomme P , Moukrim A , Tchernev N , 2002 . A new lower bound for scheduling of FMS based on AGV material handling . IFAC Proc Vol , 35 ( 1 ): 217 - 222 . https://doi.org/10.3182/20020721-6-ES-1901.00038 https://doi.org/10.3182/20020721-6-ES-1901.00038

Lacomme P , Moukrim A , Tchernev N , 2005 . Simultaneous job input sequencing and vehicle dispatching in a single-vehicle automated guided vehicle system: a heuristic branch-and-bound approach coupled with a discrete events simulation model . Int J Prod Res , 43 ( 9 ): 1911 - 1942 . https://doi.org/10.1080/13528160412331326450 https://doi.org/10.1080/13528160412331326450

Lacomme P , Larabi M , Tchernev N , 2013 . Job-shop based framework for simultaneous scheduling of machines and automated guided vehicles . Int J Prod Econom , 143 ( 1 ): 24 - 34 . https://doi.org/10.1016/j.ijpe.2010.07.012 https://doi.org/10.1016/j.ijpe.2010.07.012

Lee DY , DiCesare F , 1993 . Integrated models for scheduling flexible manufacturing systems . Proc IEEE Int Conf on Robotics and Automation , p. 827 - 832 . https://doi.org/10.1109/ROBOT.1993.292247 https://doi.org/10.1109/ROBOT.1993.292247

Lee DY , DiCesare F , 1994 . Integrated scheduling of flexible manufacturing systems employing automated guided vehicles . IEEE Trans Ind Electron , 41 ( 6 ): 602 - 610 . https://doi.org/10.1109/41.334577 https://doi.org/10.1109/41.334577

Lin JT , Chiu CC , Chang YH , et al. , 2015 . A hybrid genetic algorithm for simultaneous scheduling of machines and AGVs in FMS . In: Gen M , Kim KJ , Huang XX , et al. (Eds.), Industrial Engineering, Management Science and Applications 2015 . Springer , Berlin , p. 277 - 286 . https://doi.org/10.1007/978-3-662-47200-2_31 https://doi.org/10.1007/978-3-662-47200-2_31

Liu ZC , Ma S , Shi YJ , et al. , 2013 . Solving multi-objective flexible job shop scheduling with transportation constraints using a micro artificial bee colony algorithm . Proc IEEE 17 th Int Conf on Computer Supported Cooperative Work in Design , p. 427 - 432 . https://doi.org/10.1109/CSCWD.2013.6581001 https://doi.org/10.1109/CSCWD.2013.6581001

Liu ZC , Guo SS , Wang L , 2019 . Integrated green scheduling optimization of flexible job shop and crane transportation considering comprehensive energy consumption . J Clean Prod , 211 : 765 - 786 . https://doi.org/10.1016/j.jclepro.2018.11.231 https://doi.org/10.1016/j.jclepro.2018.11.231

Lv YL , Zhang G , Zhang J , et al. , 2011 . Integrated scheduling of the job and AGV for flexible manufacturing system . Appl Mech Mater , 80-81 : 1335 - 1339 . https://doi.org/10.4028/www.scientific.net/AMM.80-81.1335 https://doi.org/10.4028/www.scientific.net/AMM.80-81.1335

Mishra A , Dash A , Bishoyee N , et al. , 2009 . Simultaneous scheduling of machines and AGVs in FMS environment using swarm optimization and comparison with genetic algorithm . Proc POMS 20 th Annual Conf , p. 172 - 181 .

Nageswara RM , Narayana RK , Ranga JG , 2017 . Integrated scheduling of machines and AGVs in FMS by using dispatching rules . J Prod Eng , 20 ( 1 ): 75 - 84 .

Nageswararao M , Narayanarao K , Ranagajanardhana G , 2014 . Simultaneous scheduling of machines and AGVs in flexible manufacturing system with minimization of tardiness criterion . Proc Mater Sci , 5 : 1492 - 1501 . https://doi.org/10.1016/j.mspro.2014.07.336 https://doi.org/10.1016/j.mspro.2014.07.336

Nageswararao M , Narayanarao K , Ranagajanardhana G , 2015 . Hybrid meta heuristic algorithm for simultaneous scheduling of machines and AGVs in flexible manufacturing environment . Can J Basic Appl Sci , 3 ( 2 ): 29 - 44 .

Nageswararao M , Narayanarao K , Rangajanardhana G , 2017 . Scheduling of machines and automated guided vehicles in FMS using gravitational search algorithm . Appl Mech Mater , 867 : 307 - 313 . https://doi.org/10.4028/www.scientific.net/AMM.867.307 https://doi.org/10.4028/www.scientific.net/AMM.867.307

Nouri HE , Driss OB , Ghédira K , 2016a . A classification schema for the job shop scheduling problem with transportation resources: state-of-the-art review . In: Silhavy R , Senkerik R , Oplatkova ZK , et al. (Eds.), Artificial Intelligence Perspectives in Intelligent Systems . Springer , Cham , p. 1 - 11 . https://doi.org/10.1007/978-3-319-33625-1_1 https://doi.org/10.1007/978-3-319-33625-1_1

Nouri HE , Driss OB , Ghédira K , 2016b . Hybrid metaheuristics for scheduling of machines and transport robots in job shop environment . Appl Intell , 45 ( 3 ): 808 - 828 . https://doi.org/10.1007/s10489-016-0786-y https://doi.org/10.1007/s10489-016-0786-y

Nouri HE , Driss OB , Ghédira K , 2016c . Simultaneous scheduling of machines and a single moving robot in a job shop environment by metaheuristics based clustered holonic multiagent model . Proc 8 th Int Conf on Agents and Artificial Intelligence , p. 51 - 62 . https://doi.org/10.5220/0005694300510062 https://doi.org/10.5220/0005694300510062

Nouri HE , Driss OB , Ghédira K , 2016d . Simultaneous scheduling of machines and transport robots in flexible job shop environment using hybrid metaheuristics based on clustered holonic multiagent model . Comput Ind Eng , 102 : 488 - 501 . https://doi.org/10.1016/j.cie.2016.02.024 https://doi.org/10.1016/j.cie.2016.02.024

Nouri HE , Driss OB , Ghédira K , 2018 . Controlling a single transport robot in a flexible job shop environment by hybrid metaheuristics . In: Nguyen NT , Kowalczyk R , van den Herik J , et al. (Eds.), Transactions on Computational Collective Intelligence XXVIII . Springer , Cham , p. 93 - 115 . https://doi.org/10.1007/978-3-319-78301-7_5 https://doi.org/10.1007/978-3-319-78301-7_5

Poppenborg J , Knust S , Hertzberg J , 2012 . Online scheduling of flexible job-shops with blocking and transportation . Eur J Ind Eng , 6 ( 4 ): 497 - 518 . https://doi.org/10.1504/EJIE.2012.047662 https://doi.org/10.1504/EJIE.2012.047662

Priore P , de la Fuente D , Gomez A , et al. , 2001 . A review of machine learning in dynamic scheduling of flexible manufacturing systems . AI EDAM , 15 ( 3 ): 251 - 263 . https://doi.org/10.1017/S0890060401153059 https://doi.org/10.1017/S0890060401153059

Rathore K , Chauhan NR , 2015 . FMS scheduling using neural networks: a review . Proc Int Conf on Soft Computing Techniques and Implementations , p. 39 - 44 . https://doi.org/10.1109/ICSCTI.2015.7489601 https://doi.org/10.1109/ICSCTI.2015.7489601

Reddy BSP , Rao CSP , 2006 . A hybrid multi-objective GA for simultaneous scheduling of machines and AGVs in FMS . Int J Adv Manuf Technol , 31 ( 5 ): 602 - 613 . https://doi.org/10.1007/s00170-005-0223-6 https://doi.org/10.1007/s00170-005-0223-6

Reddy KS , Reddy NS , 2017 . Simultaneous scheduling of machines and AGVs in FMS by using symbiotic organisms search (SOS) algorithm . Int J Res Appl Sci Eng Technol , 5 ( 11 ): 1780 - 1790 .

Saidi-Mehrabad M , Dehnavi-Arani S , Evazabadian F , et al. , 2015 . An ant colony algorithm (ACA) for solving the new integrated model of job shop scheduling and conflict-free routing of AGVs . Comput Ind Eng , 86 : 2 - 13 . https://doi.org/10.1016/j.cie.2015.01.003 https://doi.org/10.1016/j.cie.2015.01.003

Sanches DS , da Silva Rocha J , Castoldi MF , et al. , 2015 . An adaptive genetic algorithm for production scheduling on manufacturing systems with simultaneous use of machines and AGVs . J Contr Autom Electr Syst , 26 ( 3 ): 225 - 234 . https://doi.org/10.1007/s40313-015-0174-6 https://doi.org/10.1007/s40313-015-0174-6

Sawik T , 1996 . A multilevel machine and vehicle scheduling in a flexible manufacturing system . Math Comput Model , 23 ( 7 ): 45 - 57 . https://doi.org/10.1016/0895-7177(96)00028-3 https://doi.org/10.1016/0895-7177(96)00028-3

Soukhal A , Oulamara A , Martineau P , 2005 . Complexity of flow shop scheduling problems with transportation constraints . Eur J Oper Res , 161 ( 1 ): 32 - 41 . https://doi.org/10.1016/j.ejor.2003.03.002 https://doi.org/10.1016/j.ejor.2003.03.002

Subbaiah KV , Nageswara Rao M , Narayana Rao K , 2009 . Scheduling of AGVs and machines in FMS with makespan criteria using sheep flock heredity algorithm . Int J Phys Sci , 4 ( 2 ): 139 - 148 .

Tabatabaei A , Torabi F , Paitoon T , 2018 . Simultaneous scheduling of machines and automated guided vehicles utilizing heuristic search algorithm . Proc IEEE 8 th Annual Computing and Communication Workshop and Conf , p. 54 - 59 .

Tang DB , Zheng K , Gu WB , 2020 . Hormone regulation based approach for distributed and on-line scheduling of machines and AGVs . In: Tang DB , Zheng K , Gu WB (Eds.), Adaptive Control of Bio-inspired Manufacturing Systems . Springer , Singapore , p. 47 - 72 . https://doi.org/10.1007/978-981-15-3445-4_3 https://doi.org/10.1007/978-981-15-3445-4_3

Tuma CCM , Morandin O , Caridá VF , 2013 . Minimizing the makespan for the problem of reactive production scheduling in a FMS with AGVs using a new structure of chromosome in a hybrid GA with TS . Proc IEEE 18 th Conf on Emerging Technologies & Factory Automation , p. 1 - 6 . https://doi.org/10.1109/ETFA.2013.6648079 https://doi.org/10.1109/ETFA.2013.6648079

Türkyılmaz A , Şenvar Ö , Ünal I , et al. , 2020 . A research survey: heuristic approaches for solving multi objective flexible job shop problems . J Intell Manuf , 31 ( 8 ): 1949 - 1983 . https://doi.org/10.1007/s10845-020-01547-4 https://doi.org/10.1007/s10845-020-01547-4

Ulusoy G , Bilge Ü , 1993 . Simultaneous scheduling of machines and automated guided vehicles . Int J Prod Res , 31 ( 12 ): 2857 - 2873 . https://doi.org/10.1080/00207549308956904 https://doi.org/10.1080/00207549308956904

Ulusoy G , Sivrikaya-Şerifoǧlu F , Bilge Ü , 1997 . A genetic algorithm approach to the simultaneous scheduling of machines and automated guided vehicles . Comput Oper Res , 24 ( 4 ): 335 - 351 . https://doi.org/10.1016/S0305-0548(96)00061-5 https://doi.org/10.1016/S0305-0548(96)00061-5

Umar UA , Ariffin MKA , Ismail N , et al. , 2015 . Hybrid multiobjective genetic algorithms for integrated dynamic scheduling and routing of jobs and automated-guided vehicle (AGV) in flexible manufacturing systems (FMS) environment . Int J Adv Manuf Technol , 81 ( 9 ): 2123 - 2141 . https://doi.org/10.1007/s00170-015-7329-2 https://doi.org/10.1007/s00170-015-7329-2

Wang H , Sheng BY , Lu QB , et al. , 2021 . A novel multi-objective optimization algorithm for the integrated scheduling of flexible job shops considering preventive maintenance activities and transportation processes . Soft Comput , 25 ( 4 ): 2863 - 2889 . https://doi.org/10.1007/s00500-020-05347-z https://doi.org/10.1007/s00500-020-05347-z

Wang HY , Zhao F , Gao HM , et al. , 2019 . A three-stage method with efficient calculation for lot streaming flow-shop scheduling . Front Inform Technol Electron Eng , 20 ( 7 ): 1002 - 1020 . https://doi.org/10.1631/FITEE.1700457 https://doi.org/10.1631/FITEE.1700457

Wang M , Xin B , 2019 . A genetic algorithm for solving flexible flow shop scheduling problem with autonomous guided vehicles . Proc IEEE 15 th Int Conf on Control and Automation , p. 922 - 927 . https://doi.org/10.1109/ICCA.2019.8899914 https://doi.org/10.1109/ICCA.2019.8899914

Wang XK , Wu WM , Xing ZC , et al. , 2022 . A neural network based multi-state scheduling algorithm for multi-AGV system in FMS . J Manuf Syst , 64 : 344 - 355 . https://doi.org/10.1016/j.jmsy.2022.06.017 https://doi.org/10.1016/j.jmsy.2022.06.017

Xie J , Gao L , Peng KK , et al. , 2019 . Review on flexible job shop scheduling . IET Coll Intell Manuf , 1 ( 3 ): 67 - 77 . https://doi.org/10.1049/iet-cim.2018.0009 https://doi.org/10.1049/iet-cim.2018.0009

Xin B , Lu S , Wang Q , et al. , 2023 . Simultaneous scheduling of processing machines and automated guided vehicles via a multi-view modeling-based hybrid algorithm . IEEE Trans Autom Sci Eng , 21 ( 3 ): 4753 - 4767 . https://doi.org/10.1109/TASE.2023.3301656 https://doi.org/10.1109/TASE.2023.3301656

Xin B , Lu S , He YM , et al. , 2025 . Automatic design of dynamic collaboration strategies for machines and automated guided vehicles via multiobjective genetic programming . Unman Syst , 13 ( 1 ): 233 - 246 . https://doi.org/10.1142/S2301385025500153 https://doi.org/10.1142/S2301385025500153

Xu GJ , Bao Q , Zhang HL , 2023 . Multi-objective green scheduling of integrated flexible job shop and automated guided vehicles . Eng Appl Artif Intell , 126 : 106864 . https://doi.org/10.1016/j.engappai.2023.106864 https://doi.org/10.1016/j.engappai.2023.106864

Yung TW , Ponnambalam SG , Yogeswaran M , 2009 . Multi-objective ACO for integrated scheduling of machines and material handling equipment in flexible manufacturing systems . Proc IEEE Int Conf on Automation Science and Engineering , p. 304 - 309 . https://doi.org/10.1109/COASE.2009.5234130 https://doi.org/10.1109/COASE.2009.5234130

Zeng CK , Tang JF , 2014 . Blocking job shop cell scheduling with automated guided vehicles . Proc 11 th World Congress on Intelligent Control and Automation , p. 438 - 442 . https://doi.org/10.1109/WCICA.2014.7052753 https://doi.org/10.1109/WCICA.2014.7052753

Zeng CK , Tang JF , Yan CJ , 2014 . Scheduling of no buffer job shop cells with blocking constraints and automated guided vehicles . Appl Soft Comput , 24 : 1033 - 1046 . https://doi.org/10.1016/j.asoc.2014.08.028 https://doi.org/10.1016/j.asoc.2014.08.028

Zeng CK , Tang JF , Yan CJ , 2015 . Job-shop cell-scheduling problem with inter-cell moves and automated guided vehicles . J Intell Manuf , 26 ( 5 ): 845 - 859 . https://doi.org/10.1007/s10845-014-0875-x https://doi.org/10.1007/s10845-014-0875-x

Zhang GH , Sun JH , Liu X , et al. , 2019 . Solving flexible job shop scheduling problems with transportation time based on improved genetic algorithm . Math Biosci Eng , 16 ( 3 ): 1334 - 1347 . https://doi.org/10.3934/mbe.2019065 https://doi.org/10.3934/mbe.2019065

Zhang L , 2021 . Path selection of manufacturing transformation and upgrading under the background of Made in China 2025 . China Collect Econ , ( 4 ): 9 - 10 (in Chinese) .

Zhang RW , Dou LH , Xin B , et al. , 2024 . A review on the truck and drone cooperative delivery problem . Unman Syst , 12 ( 5 ): 823 - 847 . https://doi.org/10.1142/S2301385024300014 https://doi.org/10.1142/S2301385024300014

Zheng K , Tang DB , Giret A , et al. , 2018 . A hormone regulation-based approach for distributed and on-line scheduling of machines and automated guided vehicles . Proc Inst Mech Eng Part B J Eng Manuf , 232 ( 1 ): 99 - 113 . https://doi.org/10.1177/0954405416662078 https://doi.org/10.1177/0954405416662078

Zheng Y , Xiao YJ , Seo Y , 2014 . A tabu search algorithm for simultaneous machine/AGV scheduling problem . Int J Prod Res , 52 ( 19 ): 5748 - 5763 . https://doi.org/10.1080/00207543.2014.910628 https://doi.org/10.1080/00207543.2014.910628

Zhou BH , Liao XM , 2020 . Particle filter and Levy flight-based decomposed multi-objective evolution hybridized particle swarm for flexible job shop greening scheduling with crane transportation . Appl Soft Comput , 91 : 106217 . https://doi.org/10.1016/j.asoc.2020.106217 https://doi.org/10.1016/j.asoc.2020.106217

Zhu ZQ , He YY , 2019 . An improved genetic algorithm for production scheduling on FMS with simultaneous use of machines and AGVs . Proc 11 th Int Conf on Intelligent Human-Machine Systems and Cybernetics , p. 245 - 249 . https://doi.org/10.1109/IHMSC.2019.00064 https://doi.org/10.1109/IHMSC.2019.00064

Zou WQ , Pan QK , Wang L , 2021 . An effective multi-objective evolutionary algorithm for solving the AGV scheduling problem with pickup and delivery . Knowl-Based Syst , 218 : 106881 . https://doi.org/10.1016/j.knosys.2021.106881 https://doi.org/10.1016/j.knosys.2021.106881

浏览量

Downloads

CSCD

文章被引用时，请邮件提醒。

Submit

工具集

关联资源

暂无数据