Effect of orbital errors on the geosynchronous circular synthetic aperture radar imaging and interferometric processing[J]. 信息与电子工程前沿(英文), 2011,12(5):404-416.
Lei-lei KOU, Xiao-qing WANG, Mao-sheng XIANG, et al. Effect of orbital errors on the geosynchronous circular synthetic aperture radar imaging and interferometric processing[J]. Frontiers of Information Technology & Electronic Engineering, 2011, 12(5): 404-416.
Effect of orbital errors on the geosynchronous circular synthetic aperture radar imaging and interferometric processing[J]. 信息与电子工程前沿(英文), 2011,12(5):404-416. DOI: 10.1631/jzus.C1000170.
Lei-lei KOU, Xiao-qing WANG, Mao-sheng XIANG, et al. Effect of orbital errors on the geosynchronous circular synthetic aperture radar imaging and interferometric processing[J]. Frontiers of Information Technology & Electronic Engineering, 2011, 12(5): 404-416. DOI: 10.1631/jzus.C1000170.
Effect of orbital errors on the geosynchronous circular synthetic aperture radar imaging and interferometric processing
The geosynchronous circular synthetic aperture radar (GEOCSAR) is an innovative SAR system
which can produce high resolution three-dimensional (3D) images and has the potential to provide 3D deformation measurement. With an orbit altitude of approximately 36 000 km
the orbit motion and orbit disturbance effects of GEOCSAR behave differently from those of the conventional spaceborne SAR. In this paper
we analyze the effects of orbit errors on GEOCSAR imaging and interferometric processing. First
we present the GEOCSAR imaging geometry and the orbit errors model based on perturbation analysis. Then
we give the GEOCSAR signal formulation based on imaging geometry
and analyze the effect of the orbit error on the output focused signal. By interferometric processing on the 3D reconstructed images
the relationship between satellite orbit errors and the interferometric phase is deduced. Simulations demonstrate the effects of orbit errors on the GEOCSAR images
interferograms
and the deformations. The conclusions are that the required relative accuracy of orbit estimation should be at centimeter level for GEOCSAR imaging at L-band
and that millimeter-scale accuracy is needed for GEOCSAR interferometric processing.
关键词
Keywords
references
The trial reading is over, you can activate your VIP account to continue reading.